Terms
Request Information
GENERAL PROPERTIES
  • Excellent resistance to heat, ozone and sunlight
  • Superior resistance to cold and hot water
  • Meets AWWA Standard C111/A21.11
  • Certified to NSF/ANSI/CAN 61 & 372
  • ASTM Grade D1330 GRADE 1 & 2
POLYMER
Ethylene Propylene Diene (EPDM)
Unit of Measure

POLYMER

Polymer

 N/A Ethylene Propylene Diene (EPDM)

ASTM D2000 SPECIFICATION AND TESTS


ASTM D2000 SPECIFICATION AND TESTS_AB-576

ADDITIONAL SPECIFICATIONS

Grade

 N/A Specification

Finish

 N/A Smooth

Powder

 N/A No

Color

 N/A Black

Temperature Range

Temperature [Min]

 N/A -40 ºC-40 ºF

Temperature [Max]

 N/A 121 ºC250 ºF

Specifications

Series

 N/A AB-576

ASTM Specification (SI units)

 N/A D2000: 1BA715Z1Z2

Specific Gravity (gr/cc)

 N/A 1.17

Durometer

 N/A 75 +/-5 (shore A)

Tensile Strength min.

 N/A 1500 psi

Elongation min.

 N/A 250 %

Type

 N/A Industrial Sheets

Brand

 N/A American Biltrite

Gauge x Width

 N/A 3/16x48 in

Avg. Length (Linear Ft. /Roll)

 N/A 84 ft

Surface

 N/A 80 sft

Approx. Lbs./Roll

 N/A 84 lb

Note

Note

 N/A
    Maximum pieces per roll: 2   •   Minimum piece length: 10'   •   Width tolerance: -0 / +1"
    NSF/ANSI/CAN 61 & 372, section 9 at exposure rate of 0.2 in²/liter.
    NSF/ANSI/CAN 61 & 372, section 6 at commercial hot temperature (180°F) with exposure rate of 2 in²/liter.
    FDA approved ingredients per 21 CFR 177.2600.
    Material is within commercial sheet rubber gauge tolerances.
    The documentation for sheet rubber gauge tolerances is published on our website.
    Please ensure the product meets your application specification prior to order placement.
    Specifications are subject to change without notice. The website version prevails.
    Total roll length may vary by ±10% for domestically manufactured (AB-576) Series.