POLYMER
|
ASTM D200 SPECIFICATION AND TESTS
|
ADDITIONAL SPECIFICATIONS
|
Temperature Range
|
Specifications
|
Note
Specifications
Series |
N/A AB-138 |
ASTM Specification (SI units) |
N/A D2000: 2AA420A13F17 |
Durometer |
N/A 40 |
Tensile Strength min. |
N/A 2000 psi |
Typical Tensile Strength |
N/A 2500 psi |
Elongation min. |
N/A 400 % |
Typical Elongation |
N/A 700 % |
Type |
N/A Industrial Sheets |
Brand |
N/A American Biltrite |
Gauge x Width |
N/A 3/4 x 48 in |
Avg. Length (Linear Ft. /Roll) |
N/A 30 ft |
Surface |
N/A 120 sft |
Approx. Lbs./Roll |
N/A 522 lb |
Note
Note |
N/A Maximum pieces per roll: 2 • Minimum piece length: 10' • Width tolerance: -0 / +1" Meets the requirements for FDA 21 CFR 177.2600: "Rubber articles intended for repeated use may be safely used in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section." Material is within commercial sheet rubber gauge tolerances. The documentation for sheet rubber gauge tolerances is published on our website. Typical values do not constitute a specification. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. Total roll length may vary by -±10% for domestically manufactured (AB-138) Series. |
