Catálogo de productos
- GENERAL PROPERTIES
• High abrasion resistance
• High tensile strength
• Moderate cut & tear strength
• Impact, noise, vibration reduction
• Insulative properties
• Excellent adhesion
• CR bonding
POLYMER
Natural Rubber (NR)
Neoprene Textured Bonding Layer (NR/CR)
Unit of Measure
POLYMER
| ASTM D2000 SPECIFICATION AND TESTS
| ADDITIONAL SPECIFICATIONS
| Temperature Range
| Specifications
| Note
Specifications
Series |
N/A Abrasion-Guard™ |
ASTM Specification (SI units) |
N/A D2000: 4AA425A13B13F17 |
Specific Gravity (gr/cc) |
N/A 1.03 |
Durometer |
N/A 40 +/-5 |
Tensile Strength min. |
N/A 2500 psi |
Typical Tensile Strength |
N/A 3000 psi |
Elongation min. |
N/A 500 % |
Typical Elongation |
N/A 700 % |
Tear |
N/A 180 typical |
Type |
N/A Industrial Sheets |
Brand |
N/A American Biltrite |
Gauge x Width |
N/A 1/4x48 in |
Avg. Length (Linear Ft. /Roll) |
N/A 35 ft |
Surface |
N/A 140 sft |
Approx. Lbs./Roll |
N/A 177 lb |
Note
Note |
N/A
Technical specifications are for the product without the bonding layer. Material is within commercial sheet rubber gauge tolerances. The documentation for sheet rubber gauge tolerances is published on our website. Typical values do not constitute a specification. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. Total roll length may vary by ±10% for domestically manufactured (ABRASION-GUARD) Series. |





