Search Catalog
      GO   
 Piranha® Hose Products    Hose Saws Replacement Blades
Piranha® Hose Products > Hydraulic Hoses > Assembly Equipment and Accessories > Hose Saws Replacement Blades > Part Number BLADE-SER250  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Part Number BLADE-SER250, BLADE-SER Series 250 mm Outside Dia. Hose Saws Replacement Blade




  • Serrations help dissipate heat, extending blade life and reducing smoke generation.
  • Acceptable for use with textile reinforced hoses.
  • Not recommended for use with hoses with a steel cover or containing steel (braid, spiral and/or helical) reinforcement.




Specifications  · Cautionary Statements

Specifications

Brand
Kuriyama

Outside Dia.
250 mm

Inside Dia.
40 mm

Thickness
3 mm

Type
Serrated Replacement Blade


Cautionary Statements
Blade sharpening should only be performed by the blade manufacturer. (Contact Kuriyama Customer Service for sharpening service details.)

Ensure direction of blade rotation is correct as indicated by the arrow printed on the blade.

When using a new blade or newly sharpened blade, make initial hose cuts at a low speed. A newly sharpened blade will cut very quickly, which at a high speed could lead to overheating, potentially damaging the blade.
  • Do not operate at excessive speeds that could potentially overwork the motor.
  • Do not move or rotate the hose during cutting.
  • Do not apply any solvents or lubricants to the blade.
When replacing the blade inspect for signs of wear, that the shaft rotates without vibrations and that the blade is perfectly perpendicular to the cutting surface. Before starting, actuate the hose pressing lever to ensure no interferences.


 DOWNLOADS 

Download Product Catalog Page
(PDF, 1026KB)

Cautionary Statement
(PDF, 1095KB)