Unit of Measure
General Applications
|
Construction
|
Service Temperature Range
|
Features and Advantages
|
Packaging
|
Nominal Specifications
|
Specifications
General Applications
General Applications |
N/A
|
Construction
Construction |
N/A Made from circularly woven 100% high tenacity synthetic yarn, completely protected and locked-in by a tough, highly resistant synthetic nitrile rubber and PVC blend extruded through the weave and forming a single homogenous construction without the use of glues or adhesives. |
Lining Properties |
N/A The tensile strength of the lining and cover shall not be less than 1,750 PSI (12,000 kPa), with an ultimate elongation of liner and cover not less than 450%. |
Accelerated Aging |
N/A Lining specimens subjected to an exposure of 158 ºF ± 3.6 ºF, for a duration of 96 hours shall be conditioned as per ASTM D 573, Standard Test Method for Rubber - Deterioration in an Air Oven. Then, the specimens shall be tested to ASTM D4112, Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers- Tension, Method A. Upon evaluation, the tensile and elongation properties of the liner shall not be less than 75% of their initial values. |
Abrasion Resistance |
N/A As stated in National Fire Protection Association (NFPA) 1961, Underwriters Laboratories (UL) 19 and Factory Mutual Approval Standard (FM) 2111, hose shall withstand 1 1/2 times the service test pressure without rupturing or breaking any thread in the jacket or reinforcement after 300 cycles of abrasion for a single jacketed hose. Hose assembly shall also not leak or burst after 3,000 cycles by an abrasion wheel. |
Service Temperature Range
Service Temperature Range [Min] |
N/A -30 ºC-22 ºF |
Service Temperature Range [Max] |
N/A 80 ºC176 ºF |
Features and Advantages
Features and Advantages |
N/A
|
