Kuriyama of America, Inc.

Kuriyama of America, Inc Kuriyama of America, Inc Kuriyama of America, Inc.

Kuri Tec Tundra Air
Translate to Language

Unit of Measure
Items
DOT-BRME45S Series 45º Swivel Male Elbow Fittings

DOT-BRME45S Series 1/4 in. Tube x 1/8 in. NPTF 45º Swivel Male Elbow Fitting

DOT-BRME45S Series 45º Swivel Male Elbow Fittings

DOT-BRME45S Series 1/4 in. Tube x 1/4 in. NPTF 45º Swivel Male Elbow Fitting

DOT-BRME45S Series 45º Swivel Male Elbow Fittings

DOT-BRME45S Series 3/8 in. Tube x 1/4 in. NPTF 45º Swivel Male Elbow Fitting

DOT-BRME45S Series 45º Swivel Male Elbow Fittings

DOT-BRME45S Series 3/8 in. Tube x 3/8 in. NPTF 45º Swivel Male Elbow Fitting

DOT-BRME45S Series 45º Swivel Male Elbow Fittings

DOT-BRME45S Series 3/8 in. Tube x 1/2 in. NPTF 45º Swivel Male Elbow Fitting
Description N/A Male ELB 45 Swivel 1/4 TB x 1/8 NPTF N/A Male ELB 45 Swivel 1/4 TB x 1/4 NPTF N/A Male ELB 45 Swivel 3/8 TB x 1/4 NPTF N/A Male ELB 45 Swivel 3/8 TB x 3/8 NPTF N/A Male ELB 45 Swivel 3/8 TB x 1/2 NPTF
General Applications N/A
  • Pneumatic circuits for truck and trailers: air suspension, braking systems, transmissions, locking doors and windows, seat adjustment, instrumentation, air conditioning systems, horn, wiper motors, valves, cylinders and accessories.
  • Suitable for all air assisted applications except those designed for use between frame and axle or between towed and towing vehicles.
Construction N/A Brass housing with polyethylene holding ring and nitrile (NBR) seals.
Body and Release N/A Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N
Seal N/A NBR (Low Temperature)
Holding Ring N/A Resin (PEI)
Gripping Collet N/A Stainless Steel AISI 301
Protection Ring N/A Resin (PEI)
Tube N/A Tube Support (in)
Recommended Tubing N/A Designed to work with Endure™ Air Brake tubing or other tubing that complies with DOT FMVSS 106 and meets the performance requirements of SAE J844.
Temperature [Min] N/A -50 ºC-58 ºF
Temperature [Max] N/A 100 ºC212 ºF
Tube OD N/A 1/4 in N/A 1/4 in N/A 3/8 in N/A 3/8 in N/A 3/8 in
Tube ID1 N/A 0.165 in N/A 0.165 in N/A 0.244 in N/A 0.244 in N/A 0.244 in
D1 NPTF N/A 1/8 in N/A 1/4 in N/A 1/4 in N/A 3/8 in N/A 1/2 in
D2 N/A 0.472 in N/A 0.472 in N/A 0.630 in N/A 0.630 in N/A 0.630 in
L1 N/A 0.335 in N/A 0.512 in N/A 0.512 in N/A 0.512 in N/A 0.669 in
L2 N/A 0.906 in N/A 1.102 in N/A 1.142 in N/A 1.161 in N/A 1.378 in
L3 N/A 0.886 in N/A 0.886 in N/A 1.024 in N/A 1.024 in N/A 1.024 in
Hex N/A 1/2 in N/A 9/16 in N/A 11/16 in N/A 11/16 in N/A 7/8 in
Weight Each N/A 0.059 lb N/A 0.072 lb N/A 0.116 lb N/A 0.119 lb N/A 0.159 lb
Pieces per Package2 N/A 25
Brand N/A Kuri Tec®
Type N/A Push-to Connect Elbow Fittings
Style N/A Male Swivel
Series N/A DOT-BRME45S
Max. Pressure N/A 290 psi
Vacuum Rating N/A 29 inHg
Angle N/A 45 º
Tubing Insertion Depth L N/A 0.642 in N/A 0.642 in N/A 0.720 in N/A 0.720 in N/A 0.720 in
Norm Reference N/A ANSI/ASME B1.20.3
Tightening Torque N/A 2.58 ft·lb N/A 3.32 ft·lb N/A 3.32 ft·lb N/A 5.16 ft·lb N/A 8.85 ft·lb
Thread N/A Tube
Thread 2 N/A NPTF PTFE Coated
Assembly Instructions N/A
  1. Cut the tube square (with a hose cutter) making sure that there are no burrs and that the tube is round.
  2. Insert the tube into the fitting until it bottoms.
Tube release
While pressing on the release ring, pull the tube from the fitting.

Once the tubing is connected to the fitting, make sure that the tubing is not pulled or stretched and that the minimum bend radius stated in the tubing section of this catalog is not exceeded.

To prevent accidental tube release, be certain that nothing comes in contact with the release ring. Any load on the release ring may cause an unwanted disconnection.
  • 1 The "Tube ID (in)" column heading refers to "Tube Support ID (in)".
  • 2 Only sold in package quantities.