Kuriyama of America, Inc. - DOT-BRUNE90 Series 90º Union Elbow Fittings

Request Information

Unit of Measure

Items	DOT-BRUNE90-0404 DOT-BRUNE90 Series 1/4 in. Tube x 1/4 in. Tube 90º Union Elbow Fitting	DOT-BRUNE90-0606 DOT-BRUNE90 Series 3/8 in. Tube x 3/8 in. Tube 90º Union Elbow Fitting	DOT-BRUNE90-0808 DOT-BRUNE90 Series 1/2 in. Tube x 1/2 in. Tube 90º Union Elbow Fitting	DOT-BRUNE90-1010 DOT-BRUNE90 Series 5/8 in. Tube x 5/8 in. Tube 90º Union Elbow Fitting
Description	N/A Union ELB 90 1/4 TB x 1/4 TB	N/A Union ELB 90 3/8 TB x 3/8 TB	N/A Union ELB 90 1/2 TB x 1/2 TB	N/A Union ELB 90 5/8 TB x 5/8 TB
General Applications	N/A Pneumatic circuits for truck and trailers: air suspension, braking systems, transmissions, locking doors and windows, seat adjustment, instrumentation, air conditioning systems, horn, wiper motors, valves, cylinders and accessories. Suitable for all air assisted applications except those designed for use between frame and axle or between towed and towing vehicles.
Construction	N/A Brass housing with polyethylene holding ring and nitrile (NBR) seals.
Body and Release	N/A Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N
Seal	N/A NBR (Low Temperature)
Holding Ring	N/A Resin (PEI)
Gripping Collet	N/A Stainless Steel AISI 301
Protection Ring	N/A Resin (PEI)
Tube	N/A Tube Support (in)
Recommended Tubing	N/A Designed to work with Endure™ Air Brake tubing or other tubing that complies with DOT FMVSS 106 and meets the performance requirements of SAE J844.
Temperature [Min]	N/A -50 ºC-58 ºF
Temperature [Max]	N/A 100 ºC212 ºF
Tube OD	N/A 1/4 in	N/A 3/8 in	N/A 1/2 in	N/A 5/8 in
Tube ID¹	N/A 0.165 in	N/A 0.244 in	N/A 0.362 in	N/A 0.433 in
D2	N/A 0.472 in	N/A 0.630 in	N/A 0.787 in	N/A 0.945 in
L1	N/A 0.866 in	N/A 1.024 in	N/A 1.110 in	N/A 1.398 in
Weight Each	N/A 0.040 lb	N/A 0.084 lb	N/A 0.135 lb	N/A 0.228 lb
Pieces per Package²	N/A 25	N/A 25	N/A 25	N/A 10
Brand	N/A Kuri Tec®
Type	N/A Push-to Connect Elbow Fittings
Style	N/A Union
Series	N/A DOT-BRUNE90
Max. Pressure	N/A 290 psi
Vacuum Rating	N/A 29 inHg
Angle	N/A 90 º
Tubing Insertion Depth L	N/A 0.642 in	N/A 0.720 in	N/A 0.775 in	N/A 0.917 in
Thread	N/A Tube
Assembly Instructions	N/A Cut the tube square (with a hose cutter) making sure that there are no burrs and that the tube is round. Insert the tube into the fitting until it bottoms. Tube release While pressing on the release ring, pull the tube from the fitting. Once the tubing is connected to the fitting, make sure that the tubing is not pulled or stretched and that the minimum bend radius stated in the tubing section of this catalog is not exceeded. To prevent accidental tube release, be certain that nothing comes in contact with the release ring. Any load on the release ring may cause an unwanted disconnection.
¹ The "Tube ID (in)" column heading refers to "Tube Support ID (in)". ² Only sold in package quantities.