Print Back
ONE PIECE CRIMP SPECIFICATIONS

  • Do not crimp entire length of ferrule. Measure crimp length from bottom up. Do not crimp past bottom of marking.
  • Verify crimp diameter by measuring across the lowest point (not over ridges).
Minotaur-Male-Crimp-Fitting
Unit of Measure
Items Minotaur-Male-Crimp-Fitting
FHP08NPT8
1/2 in. Hose I.D. Male Fitting for MNTR-05 Series Hose 		Minotaur-Male-Crimp-Fitting
FAR12NPT12
3/4 in. Hose I.D. Male Fitting for MNTR-075 Series Hose 		Minotaur-Male-Crimp-Fitting
FAR16NPT16
1 in. Hose I.D. Male Fitting for MNTR-100 Series Hose
Hose Series N/A MNTR-050 N/A MNTR-075 N/A MNTR-100
Hose ID N/A 1/2 in N/A 3/4 in N/A 1 in
Crimp Diameter (in) ± 0.005 N/A 0.940 in N/A 1.250 in N/A 1.530 in
Crimp Diameter (mm) ± 0.1 N/A 23.9 mm N/A 31.8 mm N/A 38.9 mm
Crimp Length (in) ± 0.010 N/A 1.300 in N/A 1.475 in N/A 2.000 in
Insert Depth (in) ± 0.063 N/A 1.500 in N/A 1.750 in N/A 2.000 in
Die Size N/A 22 mm N/A 29 mm N/A 38 mm
Micrometer Setting N/A 1.9 mm N/A 2.8 mm N/A 0.9 mm