Print Back
ONE PIECE CRIMP SPECIFICATIONS

  • Do not crimp entire length of ferrule. Measure crimp length from bottom up. Do not crimp past bottom of marking.
  • Verify crimp diameter by measuring across the lowest point (not over ridges).
Minotaur-Male-Crimp-Fitting
Unit of Measure
1 

Part Number

Hose Series

Hose ID

Crimp Diameter (in) ± 0.005

Crimp Diameter (mm) ± 0.1

Crimp Length (in) ± 0.010

Insert Depth (in) ± 0.063

Die Size

Micrometer Setting

FHP08NPT8 N/A MNTR-050 N/A 1/2 in N/A 0.940 in N/A 23.9 mm N/A 1.300 in N/A 1.500 in N/A 22 mm N/A 1.9 mm
FAR12NPT12 N/A MNTR-075 N/A 3/4 in N/A 1.250 in N/A 31.8 mm N/A 1.475 in N/A 1.750 in N/A 29 mm N/A 2.8 mm
FAR16NPT16 N/A MNTR-100 N/A 1 in N/A 1.530 in N/A 38.9 mm N/A 2.000 in N/A 2.000 in N/A 38 mm N/A 0.9 mm
Unit of Measure
1