Search Catalog
      GO   
 Kuriyama of America    DOT-BRUNE90 Series 90º Union Elbow Fittings
Kuriyama of America > Kuri Tec® Thermoplastic Hose/Tubing > Endure™ DOT Air Brake Fittings > DOT-BRUNE90 Series 90º Union Elbow Fittings > Part Number DOT-BRUNE90-1010  

Part Number DOT-BRUNE90-1010, DOT-BRUNE90 Series 5/8 in. Tube x 5/8 in. Tube 90º Union Elbow Fitting

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Union ELB 90 5/8 TB x 5/8 TB




General Applications  · Construction  · Recommended Tubing  · Temperature Range  · Nominal Specifications  · Specifications  · Assembly Instructions

General Applications
  • Pneumatic circuits for truck and trailers: air suspension, braking systems, transmissions, locking doors and windows, seat adjustment, instrumentation, air conditioning systems, horn, wiper motors, valves, cylinders and accessories.
  • Suitable for all air assisted applications except those designed for use between frame and axle or between towed and towing vehicles.


Construction
Brass housing with polyethylene holding ring and nitrile (NBR) seals.

Body and Release
Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N

Seal
NBR (Low Temperature)

Holding Ring
Resin (PEI)

Gripping Collet
Stainless Steel AISI 301

Protection Ring
Resin (PEI)

Tube
Tube Support (in)


Recommended Tubing

Recommended Tubing
Designed to work with Endure™ Air Brake tubing or other tubing that complies with DOT FMVSS 106 and meets the performance requirements of SAE J844.


Temperature Range

Temperature [Min]
-50 ºC
-58 ºF

Temperature [Max]
100 ºC
212 ºF


Nominal Specifications

Tube OD
5/8 in

Tube ID1
0.433 in

D2
0.945 in

L1
1.398 in

Weight Each
0.228 lb

Pieces per Package2
10
1 The "Tube ID (in)" column heading refers to "Tube Support ID (in)".
2 Only sold in package quantities.


Specifications

Brand
Kuri Tec®

Type
Push-to Connect Elbow Fittings

Style
Union

Series
DOT-BRUNE90

Max. Pressure
290 psi

Vacuum Rating
29 inHg

Angle
90 º

Tubing Insertion Depth L
0.917 in

Thread
Tube


Assembly Instructions
  1. Cut the tube square (with a hose cutter) making sure that there are no burrs and that the tube is round.
  2. Insert the tube into the fitting until it bottoms.
Tube release
While pressing on the release ring, pull the tube from the fitting.

Once the tubing is connected to the fitting, make sure that the tubing is not pulled or stretched and that the minimum bend radius stated in the tubing section of this catalog is not exceeded.

To prevent accidental tube release, be certain that nothing comes in contact with the release ring. Any load on the release ring may cause an unwanted disconnection.


 DOWNLOADS 

Download Product Catalog Page
(PDF, 848KB)

Endure™ Push-To-Connect Fittings
(PDF, 1582KB)


KURIYAMA OF AMERICA, INC.
Phone: (847) 755-0360 • Toll-Free FAX: (800) 800-0320 • International FAX: (847) 885-0996
360 E. State Parkway Schaumburg, IL 60173-5335 USA