Kuriyama of America, Inc.

Kuriyama logoKuriyama of America, Inc.

  • Tigerflex(TM) THT(TM)
  • Piranhaflex Hydraulics - a full line of hydraulic hose and fittings
  • All Kuri Tec(R) and Tigerflex(TM) Food Grade Hoses Are Now Phthalate Free
  • Tri-Couple - The Three-In-One Coupling Solution - One Coupling for Ferrules, Sleeves, and Clamps!

  • HTS1100

    Flexible “Floppy Guard” Interlocked Metal Hose – HT1100
    Highly-flexible interlocked metal armor hose provides maximum protection for hydraulic hoses in the most severe applications.

    Construction - A single metal strip is loosely interlock-wound to create an extremely flexible interlocked metal hose.
    Available in galvanized steel and stainless steel.

    Applications - Armor shielding for hoses where maximum flexibility and protection from abrasion and damage are important.

    Maximum Service Temperature:
    Galvanized Steel: Up to 750°F
    Stainless Steel: Up to 1800°F

  • HTS1100

    Flexible “Floppy Guard” Interlocked Metal Hose – HT1100
    Highly-flexible interlocked metal armor hose provides maximum protection for hydraulic hoses in the most severe applications.

    Construction - A single metal strip is loosely interlock-wound to create an extremely flexible interlocked metal hose.
    Available in galvanized steel and stainless steel.

    Applications - Armor shielding for hoses where maximum flexibility and protection from abrasion and damage are important.

    Maximum Service Temperature:
    Galvanized Steel: Up to 750°F
    Stainless Steel: Up to 1800°F

  • Product Image - Nylon Sleeve Guard

    Extend the life of your hose assemblies with Kuriyama’s Nylon Sleeve Guard. This unique tubular woven product provides ideal physical protection against abrasion and other external conditions found in many hydraulic hose applications. Additionally, this sleeving serves as a means of bundling several hydraulic hoses together for further protection and clean routing.
    The nylon tubular sleeving withstands temperatures of 250ºF (120ºC) and has MSHA acceptance, while maintaining its flexibility in extreme cold applications.
    Standard packaging is 100 and 50 foot rolls, depending on the size. Other lengths and colors are available upon request or as indicated below.
    "Nominal Flat Size" refers to the width of the sleeving when flat, radius to radius. It is recommended that the ends of the sleeves be heated after cutting to resist fraying. For secure fastening, sleeves are often band clamped or tied with nylon ties.

  • Product Image - Plastic Protective Coil Sleeve — PCG

    Application - The high density polyethylene plastic coil sleeve is air, water, oil, gasoline and hydraulic fluid-resistant at temperatures between 0ºF and 180ºF (-20ºC - 84ºC).
    This coil can also be used for bundling groups of hoses.

  • Product Image - Steel Protective Coil Springs — SRS

    ALFAGOMMA Steel Protective Coil Springs and Flat Coil Sleeves prolong the life of hose lines that are exposed to rugged operating conditions.
    They distribute the bending radii to avoid kinking in hose lines and protect the hose from excessive wear caused by sharp edges and abrasion and help protect the hose from deep cuts.
    The guards are constructed of steel and are plated to resist rust.

    Application - Protects hose cover and reinforcement from abrasion and accidental damage.

  • Product Image - Steel Protective Flat Coil Sleeve — SSF

    ALFAGOMMA Steel Protective Coil Springs and Flat Coil Sleeves prolong the life of hose lines that are exposed to rugged operating conditions.
    They distribute the bending radii to avoid kinking in hose lines and protect the hose from excessive wear caused by sharp edges and abrasion and help protect the hose from deep cuts.
    The guards are constructed of steel and are plated to resist rust.

    Application - For use where hose lines are subjected to excessive abrasion, kinking, or accidental damage.
    Length- 13'-1 1/2" (4 m)